Drone calibration(After pairing successful)
Push the right stick as picture shown.
(Don’t move the left stick before successful
calibration), the drone body light will flash 3
times, indicating that the drone is calibrating.
After successful calibration, the drone lights
will become solid and ready to fly.
Tips: Crashing the drone may cause it imbalanced beyond the level that can
be adjusted by the trimmer button. If this occurs, you can re-pairing &
re-calibrate.
Repeat above steps several times to practice.
Push the left stick up slowly, the drone will take off.
Move the left stick and right stick at the same
time 45 degree inward.(This operation is used
for starting/locking the motors. When the
motors are working, it could be used to stop the
motors urgently.)
Take Off
Landing
Pull down the left stick to its lowest position
slowly to land the drone on the ground.
www.udirc.com
12
Summary of Contents for Swan U42
Page 1: ...Operations Guide U47 NOVA Equipped with WIFI Camera ...
Page 28: ......
