Uconnect 5.0/5.0 NAV, Owner'S Manual Supplement

Page: 32 / 96

Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the AUX Port.
If you insert a Auxiliary device with the ignition ON, the
unit will switch to AUX mode and begin to play when you
insert the device cable.
Controlling The Auxiliary Device
The control of the auxiliary device (e.g., selecting playlists,
play, fast forward, etc.) cannot be provided by the radio;
use the device controls instead. Adjust the volume with the
VOLUME rotary knob, or with the volume of the attached
device.
NOTE: The vehicle radio unit is acting as the amplifier for
audio output from the Auxiliary device. Therefore if the
volume control on the Auxiliary device is set too low, there
will be insufficient audio signal for the radio unit to play
the music on the device.
Bluetooth Mode
Bluetooth Streaming Audio (BTSA) or Bluetooth Mode is
entered by pairing a Bluetooth compatible device contain-
ing music, to the Uconnect system.
Before proceeding, the Bluetooth device needs to be paired
through Uconnect Phone to communicate with the
Uconnect System.
NOTE: See the pairing procedure in this manual for further
details.
Once the Bluetooth device is paired to the Uconnect
System, push the MEDIA button. Once in MEDIA mode,
press the “Source” button and select Bluetooth.
5
MEDIA MODE 31