Uconnect 5.0/5.0 NAV Page 36 Owner'S Manual Supplement Download

Page: 36 / 96

Get Started

1. Visit UconnectPhone.com to check mobile device and

feature compatibility and to find phone pairing instruc-
tions.

2. Reduce background noise. Wind and passenger conver-

sations are examples of noise that may impact recogni-
tion.

3. Speak clearly at a normal pace and volume while facing

straight ahead. The microphone is positioned on the
rearview mirror and aimed at the driver.

4. Each time you give a Voice Command, you must first

push either the VR or PHONE button, wait until

after

the beep, then say your Voice Command.

5. You can interrupt the help message or system prompts

by pushing the VR or PHONE button and saying a Voice
Command from current category.

All you need to control your Uconnect system with your
voice are the buttons on your steering wheel.

1 — Push To MUTE
2 — Push To Initiate Or To Answer A Phone Call, Send Or Receive
A Text
3 — Push To Begin Radio, Media And Navigation Functions
4 — Push To End Call

UCONNECT 5.0/5.0 NAV VOICE RECOGNITION QUICK TIPS

Summary of Contents for 5.0/5.0 NAV

































































































Search results

Summary of Contents for 5.0/5.0 NAV

Reviews:

Related manuals for 5.0/5.0 NAV

Brands by name

Popular brands

Uconnect 5.0/5.0 NAV, Owner'S Manual Supplement

Search results

Summary of Contents for 5.0/5.0 NAV

Reviews:

Related manuals for 5.0/5.0 NAV

Brands by name

Popular brands