MENU
Cleave Limit
It sets the tolerance range of cleave angle.
An error message appears when a measured
right, left or both angles exceed the range.
Editable
Non Editable
Non Editable
Non Editable
Non Editable
Editable
· It estimates the gaps of the corresponding
fibers.
· An error message appears when the
deviation of the gap is greater than the
maximum range.
Gap Difference
Limit
Loss Limit
· It sets the error range of estimated loss.
· An error message appears when the estimated
loss is greater than the maximum range.
Editable
Proof Test
If [Proof Test] is set to “ON”, a test is carried out
during the opening the windshield after splicing
or pressing RESET.
Non Editable
Editable
Cleaning Power
A short period of arc discharge is performed to
remove the fine dust on the fiber surface as
setting the distance between the cross sections
of the fibers.
��
Non Editable
Editable
Cleaning Time
The duration of arc discharge is set.
