��
MAINTENANCE OF SPLICE QUALITY
Electrode Replacement
The recommended replacement cycle of an electrode is
�,��� times. If the real arc count exceeds the replacement
cycle, a message for electrodes replacement appears.
Without replacing the worn electrode, the splice loss
increases and the spliced point becomes weaker.
� Turn off the splicer power.
� Open the electrode block and unscrew the bolt.
� Remove the electrode block and take out the used electrode.
� Carefully clean the new electrodes with a cotton swab
soaked in alcohol and install them.
� Turn on the power. Perform the stabilization of the electrode
by running the [Stabilize] menu.
