WWDZWx User Manual
Date:9-Jun-2021
Ubitech Ltd.
Version:0.3
21
16.8 Association Group Info (AGI)
Association
Group
Name
Node
Count
Function
1
Lifeline
5
-
Device Reset Locally Notification
-
Sensor Binary Report
-
Indicator Report
-
Sensor Multilevel Report – Temperature “Temperature level change auto report will be sent after wake up
every time based on Configuration Parameter 0x31 Setting.”
-
Battery Report
-
Heat Alarm Notification Report (0x04)
-
0x00 = State idle
-
0x02 = Overheat – no location support -
-
0x06 = Underheat – no location support
-
Water Alarm Notification Report (0x05)
-
0x00 = State idle
-
0x02 = Water leak detected – no location support
-
Power Management Notification (0x08)
-
0x00 = State Idle
-
0x11 = Battery Fluid is low
2
Built-in Leak
Sensor Probe
5
-
Basic Set
-
0x00 = IDEL / CANCEL (Based on Configuration Parameter 0x41 Setting)
-
0xFF = TRIGGERED (Based on Configuration Parameter 0x40 Setting)
3
Remote Water
Detection Probe
5
-
Basic Set
-
0x00 = IDEL / CANCEL (Based on Configuration Parameter 0x43 Setting)
-
0xFF = TRIGGERED (Based on Configuration Parameter 0x42 Setting)
4
Overheat Alarm
5
-
Basic Set
-
0x00 = IDEL / CANCEL (Based on Configuration Parameter 0x45 Setting)
-
0xFF = TRIGGERED (Based on Configuration Parameter 0x44 Setting)
5
Underheat Alarm
(Freeze)
5
-
Basic Set
-
0x00 = IDEL / CANCEL (Based on Configuration Parameter 0x47 Setting)
-
0xFF = TRIGGERED (Based on Configuration Parameter 0x46 Setting)
