WWDZWx User Manual
Date:9-Jun-2021
Ubitech Ltd.
Version:0.3
14
12.3 Remove Custos WWD from Z-Wave Network
-
To Remove Custos WWD from Z-Wave Network, Use Gesture Recognition
i.
Set your Z-Wave Gateway into Exclusion Mode / Remove Device processing;
ii.
Shaking Custos WWD in Vertical / Horizontal to wake up it until get 1x Buzzer Sound & 1x GREEN LED ON;
iii.
Then stop shaking it, leave WWD on the table in Horizontal position as Figure 12A;
iv.
Wait for Position Recognition confirmation UI with Buzzer Sounds & GREEN LED flashing 2 times “Event success UI”;
v.
While GREEN & RED LED are flashing alternative for Gesture Recognition then turn Custos WWD from Horizontal to
Vertical position “90°”and stick close to table surface as Figure 12B;
vi.
Wait for Gesture Recognition configuration UI with Buzzer Sounds & GREEN LED flashing 2 times “Event success UI”
for completion.
Figure 12A
Figure 12B
