background image

Copyright © 2022, Ubisense Limited 2014 - 2022. All Rights Reserved. You may not

reproduce this document in whole or in part without permission in writing from Ubisense

at the following address:

Ubisense Limited

St Andrew’s House

St Andrew’s Road

Cambridge CB4 1DL

United Kingdom

Tel: +44 (0)1223 535170

WWW:

https://www.ubisense.com

All contents of this document are subject to change without notice and do not represent

a commitment on the part of Ubisense. Reasonable effort is made to ensure the accuracy

of the information contained in the document. However, due to on-going product

improvements and revisions, Ubisense and its subsidiaries do not warrant the accuracy of

this information and cannot accept responsibility for errors or omissions that may be

contained in this document.

Information in this document is provided in connection with Ubisense products. No

license, express or implied to any intellectual property rights is granted by this

document.

Ubisense encourages all users of its products to procure all necessary intellectual

property licenses required to implement any concepts or applications and does not

condone or encourage any intellectual property infringement and disclaims any

responsibility related thereto. These intellectual property licenses may differ from

country to country and it is the responsibility of those who develop the concepts or

applications to be aware of and comply with different national license requirements.

UBISENSE®, the Ubisense motif, SmartSpace® and AngleID® are registered trademarks

of Ubisense Ltd. DIMENSION4™ and UB-Tag™ are trademarks of Ubisense Ltd.

Windows® is a registered trademark of Microsoft Corporation in the United States

and/or other countries. The other names of actual companies and products mentioned

herein are the trademarks of their respective owners.

Summary of Contents for Dimension4 UWB+BLE Tag





















Reviews: