www.ruptela.com
[email protected] | +370 5 2045030
1
Tachograph Solution
Quick Start Guide
Q
HCV5
This quick start guide is only for the direct connection. For connection via the front interface, please refer
Make sure that you have:
•
A vehicle with one of the following tachographs:
o
Siemens VDO 1381 (versions higher than 1.3A)
o
Stoneridge SE5000 (versions higher than 7.0)
o
EFAS-4 or newer
•
A computer with Windows 7/8/10
•
An internet connection (or a
predownloaded
•
A USB A to USB micro (Type B) cable
•
Device overview
Indication LEDs
Opening handles
Grooves for zip-ties
GNSS antenna port
16 Pin port
Micro USB port
Audio port
14 Pin port
Indication LED patterns
LED
Pattern
Description
GNSS
Once every second
Accurate signal
Once every 0.4 seconds
No signal
Cellular
Once every 4 seconds
Connected to network and internet
Once every second
Connected to network, no internet
Once every 0.2 seconds
No signal
Always on
Link with the server is open
Peripherals
Always off
No devices connected
Once every 5 seconds
One device connected
Twice every 5 seconds
Two devices connected
Three times every 5 seconds
Three devices connected
All
Once every 5 seconds
Sleep mode
