*640-00272-07*
640-00272-07
3.
Line up the
Alignment Pins
of the
Rear Housing
with the
alignment holes of the
Adjustment Bracket
. Push the
Rear
Housing
into the
Adjustment Bracket
.
Note:
In high‑wind environments, you can add support
with additional hardware (not included):
1.
Using the four holes in the
Adjustment Bracket
as a
template, drill four holes into the
Dish Reflector
with a
4.4 mm or 11/64" drill bit.
2.
Secure the
Dish Reflector
to the
Adjustment Bracket
using M4 screws, washers, and nuts (not included).
