Ubicast EasyCast Studio, User Manual

Page: 15 / 30

There are multiples cases here :
1. You have never performed a
calibration of the system before the
recording, you’ve just set up the system
and pressed record. In this case, press
the “Configure and launch analysis” (1)
button and go to the next step.
2. You have already configured the
analysis zone (red rectangle). In this
case, just press “Launch analysis and
rendering” (2). The system will go back
to the Media list and start processing to
reframe (in this case skip the next 3
steps).
Note that pressing the “Calibrate
Autocam” (3) button will start a
long
processing time that will find objects in
the room that might look like humans
and that should be removed.
Autocam - setup (1/3)
1 2 3