UBCO 2x2 Dual-Use 2018, User Manual

Page: 36 / 57

33
Power Pack Care & Safety
The lithium-ion power pack and charger are
designed to work exclusively with the 2×2. Do not
attempt to use any power pack or charger other
than those supplied by UBCO. Extra power packs
and chargers can be purchased from UBCO Ltd.
A
Secure the power pack in place when
riding.
A
Do not drop the power pack into the 2×2
from a height. Lower it into place carefully.
A
Do not submerge the power pack or the
2×2.
A
Store in a cool place indoors.
A
Do not burn the power pack or place it near
heat sources above 80°C (176°F).
A
Keep away from children.
A
Do not attempt to open the power pack.
This will void the warranty. If you have any
issues, please contact your service provider.
A
Charge your power pack overnight at least
once a month to ensure the health of the
power pack.
A
Lithium-ion power packs do not suffer from
the same charge memory problems as
other power packs, therefore they can be
topped up at any time.
A
Always charge your 2×2 indoors and at a
temperature between 0-40°C (32°-104°F).
Charging the power pack outside of this
temperature range could damage your
power pack or affect performance and life
span.
A
Lithium is deemed a Class 9 Dangerous
Good and so the power pack should
always be charged in a non-flammable
environment (on a concrete floor, steel
shelf, etc.).
A
If storing for an extended period, ensure
the power pack has between 50% and 90%
charge. Storing the power pack with either
full or too low a charge can cause cell
damage, reducing the power pack's life.