UBCO 2x2 Dual-Use 2018, User Manual

Page: 25 / 57

22
Steering Security Lock
The 2×2 has a steering security lock to lock the
steering angle of the 2×2 when parked. This makes
the 2×2 very difficult to wheel away as the 2×2 will
turn in circles.
The steering lock is located to the right of the
steering tube just below the handlebars. The lock
is activated with the same key that activates your
2×2’s ignition.
To activate/deactivate the steering lock:
a. Turn the handlebars to the left until the lock
body lines up with the securing ring on the
headtube.
b. With the key engaged, turn the lock barrel
clockwise to extend the lock pin into the
retaining hole.
c. Deactivate by turning the key counter clockwise
to disengage the lock pin; use the steering as
per normal.
It is important to ensure the steering lock is
disengaged before starting the 2×2.
Adjusting Your Mirrors
The mirrors on the 2×2 have a pivoting ball joint
on the back of the mirror, allowing the mirror to
be adjusted to any angle. Hold and tilt the mirror
to adjust.
Ensure you have adjusted the mirrors to suit your
visibility needs before riding.