UBCO 2x2 Dual-Use 2018, User Manual

Page: 51 / 57

REAR TORQUE ARM M14 SERATED
FLANGE NUT
AXLE BUSH SPACER INSERT
LEFT TORQUE ARMRIGHT TORQUE ARM
LEFT TORQUE ARMRIGHT TORQUE ARM
48
Wheels
The front and rear wheels are identical except for
the inserts installed on the axles. This means either
wheel can be installed at the front or rear if the
correct inserts and torque arms are used.
Removing the Front Wheel:
a. Unscrew the motor cable locking sleeves and
detach the two motor cable ends.
b. With a No. 21 spanner, loosen the two serrated
flange nuts. (
TOOL TIP: It is easiest to remove
the nuts from the axle).
c. Remove the left and right torque arms from the
recesses in the fork, the wheel is now free to be
removed from the fork.
d. When putting the wheel back on ensure
that the nuts are tightened to 80 Nm with
a torque wrench.