10
UAV-1001006-001
ECCN 7A994
•
GDL 90 output
o
Traffic and FIS-B data is translated to a standard GDL 90
format for use via the integrated Wi-Fi connection or via wired
connection from a serial port.
•
Wi-Fi EFB connection
o
GDL 90 ADS-B
“in” data is transmitted over the integrated Wi-Fi
interface for reception by standards compliant Electronic Flight
Bag (EFB) applications.
4.2 Regulatory Compliance
The echoUAT meets the Minimum Operational Performance Standards of
DO-282B Class B1S, and meets the performance requirements of TSO-
C154c. It complies with the ADS-B Final Rule Technical Amendment,
dated 2/9/2015, affecting 14 CFR 91.225 (b)(1)(ii) which permits ADS-B
Out in the National Airspace System for devices meeting the performance
requirements of TSO-C154c. Accordingly, when installed in accordance
with the installation instructions of this guide, the device complies with the
aircraft requirements of 14 CFR 91.227.
(Per the February 9, 2015 rule change to 14 CFR 91.225 (b)(1)(ii))
(A letter of authorization from the aircraft manufacturer is needed for installation in LSA
aircraft)
4.2.1 FCC Grant of Equipment Authorization
This equipment has been issued an FCC Grant of Equipment
Authorization.
The equipment contains FCC ID 2AFFTUAT016 and is marked on the
equipment nameplate.
The equipment also contains FCC ID 2ADUIESP-12 and is marked on the
equipment nameplate.
4.3 Interfaces
The echoUAT provides the following standard interfaces:
•
RF Transmit and Receive via a single SMA antenna connection.
Summary of Contents for echoUAT
