23
UAV-1001006-001
ECCN 7A994
Description
Disabled, CSID always set to 1 (Callsign)
Enabled, CSID alternates between 1 (Callsign) and 0 (Flight Plan ID)
TIP:
CSID should always be "Enabled", unless there is a special
circumstance requiring it be set to "Disabled".
8.2.6 Anonymous Mode
When enabled, the EchoUAT transmits a self-assigned ICAO and sets the
Call Sign to a random string such as “PINGFDF8“ when the squawk code
matches the defined VFR squawk code.
Note
: Anonymous mode is only
active when squawking VFR (1200).
Tip:
Anonymous Mode must be “DISABLED” when certifying the unit with
either a flight test or a test set test (ramp tester).
8.2.7 Emitter Category
To assist ATC tracking of aircraft, an aircraft category can be transmitted.
Select the aircraft category that most closely matches the aircraft.
Emitter Category's
Light Airplane
Rotorcraft
Small Airplane
Glider / Sailplane
Large Airplane
Lighter Than Air
Large Airplane with High Vortex
Parachute
Heavy Airplane
Ultralight
Highly Maneuverable Airplane
UAV
Space Craft
Tip:
Fixed wing aircraft with a maximum takeoff weight less than 15,000 lbs
are
Light Airplanes.
8.2.8 VFR Squawk code
This sets the default VFR squawk code. E.g. 1200 for the USA.
8.2.9 ADS-B-In Capability
Sets the ADS-B in equipment capability reporting. The echoUAT is capable
of receiving both ADS-B frequencies, 978 UAT and 1090. The
recommended setting is “
Both UAT and 1090
” unless there is no
Summary of Contents for echoUAT
