17
while.
NOTE:
The station's hot air gun and soldering iron’s handles use high-strength
stainless steel tubes. The station goes through 4 or more testing,
inspection, and calibration procedures before rolling off the assembly line.
The steel tube may exhibit light bronze color as a result of our quality
control efforts. It is normal to have a slightly bronzed steel tube when
using a brand-new station, rest assured for regular usage.
1. If a layer of oxidization forms on the surface of the soldering iron tip,
a misconception can be created that the soldering tip cannot heat up
properly to melt the solder and do the tinning. But the actual temperatures
of both the heating element and soldering tip are high. In such an instance,
please do not increase the temperature value confusedly but use a metal
wool ball to remove the oxidization following the steps below:
A. Set the temperature to 300
°
C (572
°
F).
B. Once the temperature stabilizes, gently rub the soldering iron tip
inside the metal wool ball.
C. When the oxidization is partially removed, continue applying
Soldering Station
