5
Function Table
Function
Item & Description
1. Quick Erase
Erases the index table only.
2. Full Erase
Erases the entire device capacity. Complies with NIST 800-
88 Standards.
3. DoD Erase
3-Pass erases the entire device capacity. Complies with
DoD5220.22-M Standards.
4. DoD EraseComp
3-Pass erases the entire device capacity and verifies.
Complies with DoD5220.22-M Standards.
5. Secure Erase
7-Pass erases the entire device capacity. Complies with
DoD5220.22-M(ECE) Standards.
6. 7 Pass Erase
Performs by sending ATA commands to the device(s)
requiring complete purging of data by its internal methods,
which conforms to NIST 800-88 standards. If you interrupt
the secure erase process, your device(s) will be unusable.
7. Utility
7.1 Copy
Copies source device to connected target device(s). Refer
to function 8.2 Copy Area for 5 different copy modes.
7.2 Compare
Verifies target device(s) bit by bit to the master device.
7.3 Copy+Compare
Automates copy and compare by first duplicating and then
verifying all the data, bit by bit.
7.4 Show Disk Info.
Displays connected device(s) detail information.
7.5 Show System Info.
Displays information of the duplicator system, including
controller model number and firmware version.
