11
(if there is any bad sector)
Step 4: Completion!
The copy result (Pass/Fail), total copy time and bad sectors will show on LCD.
Copy Result
Pass
Fail
Note
The default setting of error counter is 0. If users want to adjust
the accepted error sectors of the HDD, they can set "8.3 Skip
Error".
7.2 Compare
The compare function is used to check if the data on source HDD is identical to
target HDD after duplication.
Step 1: Prepare Source and Targets
Prepare the source HDD and target HDDs to compare after duplication is
completed.
Copy Process
Bad Sector R:0
0:01 48% W:1
Source bad sector
Target bad sector
Copied
Time
Copy Process
Pass 0:05
No Bad Sector!
Fail 0:05
Bad Sector R0 W1
Total copy time
