LISA-C2 series and FW75-C200 - System Integration Manual
UBX-13000620 - R21
Early Production Information
Features description
Page 79 of 103
3.5.3
Aeris
3.5.3.1
Preparation
EDF (electronic data file) information has to be loaded into the Aeris database prior to starting any provisioning
attempt. Access to the AT Command interface through a COM port is required.
3.5.3.2
Conversion steps
The u-blox LISA-C200 can be migrated to Aeris mode using +UAERIS AT command. Once in Aeris mode, the
MIN and MDN can be programmed using the appropriate AT commands. All other settings are preprogrammed
at the factory and should not be modified.
After the device is provisioned using AerPort, enter the device parameters following the steps below, where:
XXXXXXXXXX=Device MDN
YYYYYYYYYY=Device MIN
Step
AT Command
Response
Comment
02
AT+UAERIS=0
OK
Migrate to Aeris mode
03
AT$MDN=000000,<MDN>
OK
Program the MDN
04
AT$MSID=000000,<MIN>
OK
Program the MIN
Post Activation Validation (Optional)
These optional steps may be performed to confirm that the module has been correctly programmed.
Step
AT Command
Response
Comment
02
AT$MDN?
XXXXXXXXXX
OK
Confirm the MDN
03
AT$MSID?
YYYYYYYYYY
OK
Confirm the MIN
The command AT+UAERIS=0 needs to be sent within the first 15 seconds of powering-up the device
If the module has gone through an OMA-DM session (Sprint,) and received the provisioning values, then the
following URC is seen and repeated three times (each time corresponding to: device configuration, PRL update,
FUMO):
•
+UOMASTAT:1,0,0
If there is a failure in the OMA-DM session, then a returning URC appears as:
•
+UOMASTAT:1,1,0
If the above URC sequence pair is not observed three times or a URC indicates failure, it is recommended to:
•
Run AT$MDN? to confirm the device is not provisioned with a valid phone number
•
Perform AT$RTN=000000
•
Run again AT+UAERIS=0
The easiest way to check for the Aeris profile is by AT$QCMIPGETP=1 command.
•
Aeris profile returns: MEID(HEX)@tsp08.sprintpcs.com
•
Sprint will use the format: <username/MDN>@sprintpcs.com
