manualshive.com logo in svg

Tysso POS-6000-i, User Manual

The Tysso POS-6000-i is a cutting-edge point-of-sale system that offers advanced features for small businesses. Easily navigate through the functions with the included User Manual, available for free download from our website. Get the most out of your POS system with step-by-step instructions at manualshive.com.

Share
Download
background image

 

 

- 97 - 

 

7.  Appendix 

 

 

Mainboard Technical Document 

 

 

 
The settings of the mainboard are factory preset values and need not adjust for most 
applications. 
Please reserve the settings, installation and maintenance to the qualified personnel only. 
 
For the detailed information relating to the mainboard configurations, please refer to the 
manual of the mainboard for detailed instructions. 
(Driver & Utility\POS Terminal Driver\Core i\MANUAL) 
 
 
 
 

Summary of Contents for POS-6000-i
















































































































Reviews:

No comments

Related manuals for POS-6000-i

Symbol PDT8138 Quick Reference Manual preview
PDT8138
Brand: Symbol Pages: 39
Idemia MorphoAccess SIGMA Lite Series Quick User Manual preview
MorphoAccess SIGMA Lite Series
Brand: Idemia Pages: 32
Jepower T508A User Manual preview
T508A
Brand: Jepower Pages: 8
Magtek DynaWave Installation And Operation Manual preview
DynaWave
Brand: Magtek Pages: 39
VeriFone VX 520-G Installation Manual preview
VX 520-G
Brand: VeriFone Pages: 56
bankSA PC-EFTPOS i5100 Operating Manual preview
PC-EFTPOS i5100
Brand: bankSA Pages: 16
Omron NT2S-SF121B-E - Quick Start Manual preview
NT2S-SF121B-E -
Brand: Omron Pages: 31
UniData Communication Systems Neon 2000 Series Manual preview
Neon 2000 Series
Brand: UniData Communication Systems Pages: 59
b&c data system EzW User Manual preview
EzW
Brand: b&c data system Pages: 42
Pax Technology PAXPOS S80 Quick Reference Manual preview
PAXPOS S80
Brand: Pax Technology Pages: 2
Pax Technology D180 Quick Start Manual preview
D180
Brand: Pax Technology Pages: 8
National Instruments TBX-96 Manual preview
TBX-96
Brand: National Instruments Pages: 12
National Instruments TB-2605 Installation Manual preview
TB-2605
Brand: National Instruments Pages: 12
Prestel VCS-G2PRO User Manual preview
VCS-G2PRO
Brand: Prestel Pages: 17
weintek MT8102iE Series Installation Instruction preview
MT8102iE Series
Brand: weintek Pages: 2
Fametech TP-8515 Service Manual preview
TP-8515
Brand: Fametech Pages: 37
Tailwind Verifone VX 520 PEDPack Quick Installation Manual preview
Verifone VX 520 PEDPack
Brand: Tailwind Pages: 2
NCR RealPOS XR7 Kit Instructions preview
RealPOS XR7
Brand: NCR Pages: 6

Brands by name

Popular brands

Load more brands