![background image](http://html1.mh-extra.com/html/tysso/bcp-1100/bcp-1100_user-manual_1187220011.webp)
-19-
-18-
Erase Data in BCP
Change Password
Select this option to erase/delete all the data stored in the BCP
unit. Please note the erased data cannot be recovered. To be on
the safe side, you may want to back up your data prior to
executing this command.
The utility allows you to change to a new password only if it
successfully verifies your current password. Your password can
contain at most 8 alphanumeric characters, including lower-case
a ~ z, upper-case A ~ Z, and 0 ~ 9.
Note that there is no default password preset at factory. When
you set up your password for the first time, leave out the
Current Password field and only fill in the New Password field
and the Confirm New Password field.
Enable/Disable Real Time Clock
Disable
Enable
The date and time of a successful scan are logged in the BCP
unit. This menu item allows you to include/exclude the
timestamp to be displayed in the output window of the
download operation.
When
is selected, each record in the download output
window will not be time stamped.
When
is selected, each record in the download output
window will be prefixed with the date and time of the scan.
Note that the real time clock in the BCP unit is not initialized at
factory. You will need to do it by selecting the sync-up option
when you first enable the RTC. Also note that you need to
reinitialize the RTC each time you install a new battery.
When RTC is enabled, a timestamp in the format of
Year/Month/Day Hour:Minute:Second (e.g., 2005/07/07
09:37:46) will be appended in front of each data record.