Note:
1. If bluetooth setting is switched off before single test data is transmitted, press for 4 seconds to turn the bluetooth on,
will appear. After data is transmitted, bluetooth setting will turn to “OFF” as it was.
2. If it is not the first time your mobile device to connect with the meter, then the pair process is not required. Your device
will connect with bluetooth meter directly.
1. Refer to strip test process (p.15) to proceed the test (Fig.72).
2. Turn on BLE tool APP (with Blood Glucose Test) and Bluetooth on your mobile device after test is completed.
3. Select the device shown (ex. TBMTXXXXXXXX) in APP list and click connect, stops blinking when the meter &
mobile device is connected. Meter will be paired with the device that is connected first time. The passkey will be
shown on the meter (Fig.73), enter passkey on your device. If the passkey is not entered correctly, error code (Err)
will appear on the display (Fig.74).
4. Test result will automatically transmit to the APP. will disappear (Fig.75).
To Transfer Single Test Data
(Fig.72)
(Fig.73)
(Fig.75)
Passkey
(Fig.74)
32