![background image](http://html1.mh-extra.com/html/typhoon/q500-4k/q500-4k_instruction-manual_1187070031.webp)
30
WARNING:
Alkaline Batteries May explode or leak, and cause burn injury if
recharged, disposed of in fire, mixed with a different battery type, inserted
backwards or disassembled. Replace all batteries at the same time. Do not
carry batteries loose in your pocket or purse. Do not remove the battery
label.
STEP 1) Remove the
Battery Cover / Door from
the bottom of the Steady
-
Grip™
Hold the bottom of the
SteadyGrip™
toward
yourself with the front
part facing downward.
Installing The Steadygrip™ Batteries
WARNING:
Before switching on the SteadyGrip™ it is highly recommended
to first securely attach the CGO3 to your SteadyGrip™.
QUICK TIP:
It’s a good idea to ensure you have your microSD card with lots
of space for photos and videos handy.
STEP 1)
Carefully slide the top part of the CGO3 (that also attaches below the nose of
the Q500 the TYPHOON) onto the mount below the front part of the SteadyGrip™.
A
corresponding ‘click’ will be noticed once the CGO3 has securely been installed into
the slide-in mount on the SteadyGrip™.
Attaching The CGO3 to The Steadygrip™
Slide the battery cover / door upward with slight force and inspect the AA
battery compartment.
STEP 2) Install 8x AA Batteries
The use of rechargeable batteries is strongly recommended. Alkaline
batteries only support the device to work 15 minutes.
STEP 3) Re-installing the Battery Cover / Door on the bottom of the
SteadyGrip™
Once you’ve installed 8 fresh AA batteries, Hold the bottom of the Steady-
Grip™ toward yourself with the front part facing downward. Slide the
battery cover / door downward with slight force and ensure you hear and
feel a noticeable ‘click’ indicating the battery cover / door has been closed
securely.
STEP 2)
Carefully connect the CGO3’s power/control connector to the power/control
port of the CGO SteadyGrip™ and then insert a microSD card into the corresponding slot
on the bottom of the CGO3. You can use the included 16GB card (from your RTF
package) or any Class 10 microSD card up to 128GB.
STEP 3)
Powering on and initialization. Place your CGO SteadyGrip™ on a flat and stable
surface, then switch on the Steady-
Grip™ and it will initialize after 4-8
seconds of no movement or
vibration.
SteadyGrip™ Main LED Status:
Upon Powering on: Green LED blinking for twice and then solid GREEN for READY TO USE!
Pitch Follow Function: GREEN LED blinking
Low Voltage Warning: RED LED blinking slowly
Power Cut-off: RED LED blinking quickly
Summary of Contents for Q500 4K
Page 1: ...Version 2 0 ...
Page 20: ...19 ...