TYPHOON Q500 4K, Instruction Manual

Page: 21 / 37

Press to enter Photo Capturing, and press Button A to take pictures.
in this mode, the photos taken are 12 megapixels.
Press to enter Video Recording, and press Button B to start or stop
recording.
CAUTION: ALWAYS stop recording video before turning off the
TYPHOON/CGO3 to avoid data loss. If you accidentally turn off the
TYPHOON/CGO3 before you stop recording, re-insert microSDcard (if
removed) and turn the system on again. Wait approximately 20 seconds
until the camera LED starts to glow solid green indicating the last video
file was recovered.
CAUTION: When enter Photo Capturing, video recording is disabled.
You MUST switch to video recording to start record videos. During
video recording, picture taking (Button A) is accessible. The resolution is
set by the video resolution. In this mode, you will capture still phtos
from the video.
Taking Photos And Recording Video
The ST10+ seamlessly integrates control of the CGO3 so you can easily
take still photos and start/stop video recording using the corresponding
buttons located on top:
TO START/STOP RECORDING VIDEO
Press the button located near the top right corner of the ST10+. You’ll hear
an audible indication from the ST10+ each time the recording starts/stops.
And while video is recording the LED indicator on the front of the CGO3
will flash blue and green, and there will be a red dot next to the time length
of the recording near the upper right-hand corner on the screen of the
ST10+.
CHOOSING CGO3 PRO FOR TAKING PHOTOS AND RECORDING VIDEOS
If users are professionals in photography and video graphy, and want to
reset related specifications, please follow the steps below:
Step 1) Press Flight Settings, choose Camera Select, press C-GO3-Pro, press
Select, and press OK.
Step 2) The second left column is available for adjusting the camera settings,
like white balance, etc.
Step 3) Press , and press Video Settings, different video resolutions are available.
NOTE: CGO3 camera is the default selection in ST10+. You can take still
phtos while video recording. The resolution is set by the video resolution. In
this mode, you will capture still photos from the video.
TO TAKE A STILL PHOTO
Press the button located near the top left corner of the ST10+. You’ll hear
an audible ‘shutter’ sound from the ST10+ and the LED indicator on the
front of the CGO3 will change from glowing solid green to glowing solid
blue. It will take approximately 5 seconds to capture the photo and before
you can take another still photo.
20
Model:Q500 4K Welcome,Pilot 07:25
GPS
N/A
SAT
N/A
POS
N/A E
N/A N
MODE
N/A
ALT
N/A ft
VOLTS
N/A V
G-SPD
N/A mph
DIS
N/A ft
System Settings Flight Settings Model Select
WB
ISO 32
1/250s
Auto
Auto
Lock
Sunny
Cloudy
Fluorescent
AWB
3840 x 2160 F30
A
B
C