TYPHOON Q500 4K, Instruction Manual

Page: 29 / 37

ST10+ and CGO3 Binding
Step 1) Turn on the ST10+, and if required tap the screen (outside of the
pop up status window) to bypass the RC and WiFi connection process.
Step 5) if required tap the
screen (outside of the pop
up status window) to
bypass the RC and WiFi
connection process, then
tap the ‘Flight Settings’
button and press ‘OK’ to
bypass any pop up
warnings/alerts.
Step 6) Tap the ‘Bind’
button and select the
‘CGO3_XXXXXX’ camera
listed in the column under
‘Camera’, then enter the
password ‘1234567890’
when prompted and tap
‘OK’ after the connection
has been established.
Step 7) Tap the ‘Back’ button two (2) times to return to the main screen and
the camera should automatically connect to the ST10+.
IMPORTANT NOTE: Streaming video from the CGO3 to the ST10+ and to
a separate phone/tablet (or another Yuneec transmitter/personal ground
station) at the same time is NOT recommended as it will result in a very
significant lag in the video downlink.
Step 2) Tap the ‘Model
Select’ button, and if
required press ‘OK’ to
bypass any pop up
warnings/alerts.
Step 3) Select the existing
model (for example: ‘the
TYPHOON’) you would like
to bind to (or create a ‘New
Model’), and if required
press ‘OK’ to bypass any
pop up warnings/alerts.
Step 4) Turn on the
TYPHOON and ensure that
the CGO3 is powered on.
28
Model: 4K Welcome,Pilot 10:48:28 pm 10
GPS
Ready
SAT
13
POS
00.0000E
00.0000N
MODE
Angle
ALT
21.4 ft
VOLTS
12.3 V
G-SPD
0.0 mph
DIS
22.5 ft
System Settings Flight Settings Model Select
HOME
Model: 4K Welcome,Pilot 10:48:28 pm 10
Model Select
New Model gh
Model: 4K Welcome,Pilot 10:48:28 pm 10
GPS
Ready
SAT
13
POS
00.0000E
00.0000N
MODE
Angle
ALT
21.4 ft
VOLTS
12.3 V
G-SPD
0.0 mph
DIS
22.5 ft
System Settings Flight Settings Model Select
HOME
Model: 4K Welcome,Pilot 10:48:28 pm 10
SR24_16042
SR24_16042
Not connected
Model Camera