The TYPHOON Q500 4K, CGO3 And ST10+ Overview
The TYPHOON Q500 4K / CGO3
1 CGO3 Gimbal Camera
2 Camera Microphone
3 Camera LED Status Indicator
4 Camera Lens
5 5.8GHz Antenna
6 Main LED Status Indicator
7 Power Switch
ST10+
8 Proportional Control Rate Slider
9 USB Connector/Charging Port
10 Audio/Earphone Jack
11 Take Still Photo Button
12 Start/Stop Motors Button
13 Rudder/Yaw Control (for Mode 2 and Mode 1)
14 Throttle/Altitude Control (for Mode 2)
Elevator/Pitch Control (for Mode 1)
15 5.8GHz Antenna (located inside the case)
16 Status Indicators (for ST10+ battery, 5.8GHz
WiFi and GPS)
17 2.4GHz Antenna (located inside the handle)
18 Start/Stop Video Recording Button
19 Flight Mode Selection Switch
20 Aileron/Roll Control (Mode 2 and Mode 1)
21 Elevator/Pitch Control (Mode 2)
Throttle/Altitude Control (Mode 1)
22 Power Switch
23 Volume and Navigation Touch-Activated Buttons Volume
Down/VolumeUp/Menu/Home/Back)
24 CGO3 Pitch Angle/Position Control Slider
25 SD Card Slot (located under the battery)
The ST10+ is equipped with an internal cooling fan and components that deliver vibrating and
audible alerts.
IMPORTANT NOTE:
Although the ST10+ is equipped with digital ‘trims’ (located below the control
sticks) they are not active/functional when controlling the TYPHOON.
10
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Summary of Contents for Q500 4K
Page 1: ...Version 2 0 ...
Page 20: ...19 ...