KANGAROO JOEY
™
37
Enteral Feeding Pump
figure 35. blue Door Replacement.
battery Pack
See Section VIII for full instructions on replacing Battery Pack. During long-term non-usage or storage (greater than 1 year) of the
pump, battery discharge and deactivation may tend to occur. It is recommended that the battery be disconnected during this time.
The battery may need to be charged and discharged several times to restore optimal capacity.
battery Door
To replace Battery Door, see Figure 36 and do the following:
1. Place Battery Door over battery opening. Make sure the rubber periphery seal on the pump fits into the groove in the
Battery Door before closing all the way. Avoid pinching the seal to retain a water-tight seal.
2. Place long and short screws in their proper holes.
Power Cord
See Section IV for initial setup, including Power Cord attachment.
Pole Clamp
See Section IV for initial setup, including attachment of the Pole Clamp to the pump.
figure 36. battery Door Replacement.
