4. Prepare lead sheath.
Remove lead oxide from the lead sheath and clean with oil-
free solvent.
Remove lead oxide
and clean
5"
(128mm)
Lead Sheath
PILC
C
653
5. Remove lead sheath as shown.
Lead
Sheath
Cutback
Kit C
HVS-T-1581E-S 15”
(381mm)
HVS-T-1582E-S 16”
(406mm)
HVS-T-1583E-S 17”
(432mm)
C
C
L
Lead Sheath
Phase Shield
PILC
101
If Shielded PILC Cable
Cut back any bedding and/or shielding tapes over all three
phases to lead sheath cutback. Cut back phase shields and
remove any conductive material from paper insulation as
shown.
Tack solder metal tape shields to prevent unwrapping and tape
over sharp edges with one wrap of electrician’s tape.
Go to Step 7.
CHOICE 1
Lead
Sheath
Paper
Insulation
6"
Phase Shield
(150mm)
PILC
102
Lead Sheath
Paper Insulation
1/2"
Belt Papers
(10mm)
PILC
103
6. Cut back shield or belt papers.
Choose the cable type and follow the directions given.
If Belted PILC Cable
Remove belt papers as shown.
Go to Step 7.
CHOICE 2
PCN 307937-000
Effective Date: March 13, 2007
PII 54917, Rev AJ
4
Table 4
Poly
Poly
PILC
Wire Cutback
Semi-con Cutback
Lead Sheath Cutback
Kit F
B
C
HVS-T-1581E-S 12”
(305mm)
4-1/2”
(114mm)
15”
(381mm)
HVS-T-1582E-S 13”
(330mm)
5-1/2”
(140mm)
16”
(406mm)
HVS-T-1583E-S 14”
(356mm)
6”
(152mm)
17”
(432mm)
*If the 3/C PILC cable has an outer jacket, remove the jacket to dimension “C” plus 5.0”
(127mm)
.
