Tomcat i7221 S5150
Chapter 4: SATA/RAID Setup (for SATA RAID model)
4-28
http://www.tyan.com
4.12.3 Successful Creation
If the manual volume creation process was completed successfully, the following dialog
window will appear:
4.13 Configure BIOS for Adaptec RAID for Serial ATA on Board
(Supports RAID 0/1 with 2X SATA ports -SATA 1& SATA 2 only,
SATA 3 & SATA 4 not working)
The motherboard supports RAID 0 or 1 for Serial ATA drives through the Intel
®
ICH6R chipset.
The Serial ATA as RAID option must be enabled in the BIOS before the system can load the
Adaptec
®
RAID option ROM code for Intel
®
RAID. The Adaptec
®
RAID option ROM is a
standard PnP (Plug and Play) option ROM that provides a pre-operating system user interface
for the Intel
®
RAID implementation. It also allows the boot order to be selected from within the
BIOS setup utility.
For this information, please check Tyan’s web site at:
www.tyan.com
Warning
Before installing the driver into an existing system, backup any important
or useful data. Failure to follow this accepted PC practice could result in
data loss.
The Intel RAID feature is available in Win2003 and Win2003.
4.13.1 BIOS Configuration
1.
Enter the BIOS setup program by pressing the <F2> key after the Power-On Self Test
(POST) memory test begins.
