Tomcat i7221 S5150
Chapter 4: SATA/RAID Setup (for SATA RAID model)
4-5
http://www.tyan.com
Create RAID 0 or RAID 1 Volume
Note
The following procedure should only be used with a newly-built system or
if you are reinstalling your operating system. The following procedure
should not be used to migrate an existing system to RAID 0.
After pressing the <Ctrl> and <i> keys simultaneously, the following window will appear:
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model Serial #
0 WDC WD360CD-00FN WD-WMAH91105870
3 WDC WD360CD-00FN WD-WMAH91063877
Size Type/Status(Vol ID)
34.4GB
34.4GB
Non-RAID Disk
Non-RAID Disk
Intel (R) Application Accelerator RAID Option ROM v4.0.0.6211
Copyright (C) 2003-04 Intel Corporation. All Rights Reserved.
[ ]-Select [ESC]-Exit [ENTER]-Select Menu
DIS K/V OLUM E INFORMATIO N
[ ]
MAIN M ENU
[ ]
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
1. Select option 1 ‘Create RAID Volume’ and press the <Enter> key and the following window
will appear:
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
can not contain special characters.
Intel (R) Application Accelerator RAID Option ROM v4.0.0.6211
Copyright (C) 2003-04 Intel Corporation. All Rights Reserved.
[ ]-Change [TAB]-Next [ESC]-Previous Menu [ENTER]-Select
HEL P
[ ]
CREATE VO LUME MENU
[ ]
Name: RAID_Volume0
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size: 128KB
Capacity: 68.9 GB
Create Volume
