29
http://www.TYAN.com
3.
Connect one end of the power cord to the system and the other end to an electrical
outlet.
4.
Connect the display monitor’s D-type signal connector to the system’s VGA port.
Then plug one end of the monitor’s power cord into the power socket on the monitor
and the other end to an electrical outlet. Turn on the monitor before turning on the
system.
5.
Connect a PS/2 keyboard to the system’s PS/2 port.
6.
Switch on (I) the main power switch on the back of the system.
NOTE: After the power switch is switched on for the first time, it can remain in the ON
position. For later powering on and off, use the power button on the front of the system.
7.
Press the power button to turn on the system. The hard disk drive spins up, the fan
turns on, and the LCD screen lights up. A number of status messages are displayed
on the screen during the boot process.
CAUTION: It is important to follow the proper power-down procedure for turning off the
system.
