Twose MAXICUT 280, Operator'S Manual

Page: 27 / 54

10
DRIVELINE ATTACHMENT
Before starting assembly of the Driveline ensure that all paint, dirt and grease are removed
from the Gearbox Shaft (1). To ease assembly, apply a light coat of grease to splines and
assemble. DO NOT ASSEMBLE A DRIVELINE WITHOUT A SHIELD.

Attach the slip clutch end of the driveline to the gearbox input shaft (1) securely.
(Ensure the Slip Clutch is fully located onto the input shaft splines).

Tighten locknuts (2) alternately until they have reached the correct torque. (Refer to the
Torque Chart in the Maintenance Section for correct setting).

RE-FIT ALL FIXED GUARDING