Twose MAXICUT 280, Operator'S Manual

Page: 26 / 54

9
ASSEMBLY SECTION
The Maxicut 280 will attach to most tractors with Cat. II and Cat. II Quick Hitch.
The Topper requires a tractor with 540-rpm PTO with a minimum of 50 HP
(37kW).
DEALER SET-UP INSTRUCTIONS
Assembly of this Mower is the responsibility of the Dealer. The Mower should be delivered
to the Owner completely assembled, lubricated, and adjusted for normal cutting conditions.
Set up Mower as received from the factory with these instructions. Open parts box and
layout all the parts to make location easy. Refer to the parts lists and exploded view
drawings for more details.
This Mower is shipped partially assembled. Assembly will be easier if components are
aligned and loosely assembled before tightening hardware.
Always use personal protection devices such as eye, ear, and feet protection
during assembly.
‘A’ FRAME ASSEMBLY

Insert bolt M20 x 55 (4) into lower end of each ‘A’ Frame half (1) and fasten with
locknut (5).

Align Link (2) between ‘A’ Frame halves (1) and Braces (3) with hole at top and retain
with Bolt (6) and Locknut (4).

Attach Braces (3) to rear lugs on the mainframe with Bolts M20 x 55 (4) and Locknuts
(5).
5
4
2
6
5
1
1
7
8
4
5
4
5
8
4
5
3
3
ITEM QTY. DESCRIPTION
1 2 'A' FRAME HALF
2 1 LINK
3 2 BRACE
4 4 BOLT
5 5 NUT
6 1 BOLT
7 4 LYNCH PIN
8 2 PIN