CUT OUT DIMENSIONS FOR BUILT-IN APPLICATIONS
WARNING:
The Infrared Sear Station must be installed in a NON-COMBUSTIBLE ENCLOSURE.
13-1/8"
12"
11-3/4"
24-1/4"
Twin Eagles Infrared Sear Station is ETL – approved for residential installation. Cutout must
include a 4” (10.2cm) x 4” (10.2cm) opening for a rear or bottom gas connection in the center of
the cutout as indicated by the square cut outs in the diagram above.
All dimensions shown are for planning purposes only.
Twin Eagles reserves the right to change specification without notice.
5
