TVU MLink Set-up and Operating Guide
TVU MLink
Page 37 of 75
live histogram allows users to recall a histogram of the entire past transmission and
display it as a Web-based graph to review the overall performance
(A)
of that
transmission over a certain period of time
(B)
(Figure 31). When the Quality button is
selected, users will be directed to a webpage where they can access the post-live
histogram.
Users can look at a transmission that took place on a specific date as well as monitor the
entirety of a live transmission
(C)
(Figure 31). The automatic refresh time can be set to a
desired length
(D)
and users can search for a specific transmitter by typing in the PID
number of the transmitter
(E)
.
Figure 31
Mode Selection
The currently selected mode displays as a green-lighted tab. The modes that can be
chosen are:
•
Live
: Live mode is the primary interface to be used during a Live transmission.
When this tab is selected, the status of each of the datacard network connections
is displayed under the “Monitor” section of the interface and the Bitrate, Delay,
and Operational Mode buttons are displayed.
•
Record
: Record mode displays the store and forward interface for the preview,
download, and management of Pack stored footage and files transferred via Auto
Sync. Files transferred via FTP can also be accessed via this interface.
Operational Mode Selection
Depending on your news gathering environment, you can choose from the following
preset bitrates and latencies (Figure 32):
•
Interview
: Bitrate 2048, delay 2 seconds.
•
Normal
: Bitrate 5120 delay 4 seconds.
A
B
C
D
E
Summary of Contents for MLink TE4100
Page 2: ......
