TVU MLink Set-up and Operating Guide
TVU MLink
Page 20 of 75
Note
: If the interface connected with the BGAN device is consistently yellow and does not
change to green after setting up the “Link Type”, please check whether the BGAN
equipment - when connected to a PC - can work normally with LaunchPad’s X-stream
mode.
5.
Check on the TVUPack’s screen to make sure the BGAN is connected.
6.
Power off the BGAN device to close the connections.
If the BGAN is the only device connected with the Receiver, then the Receiver will
automatically change the bitrate to 80% of the XStream with four seconds of delay at the
CBR mode.
If there is no BGAN connected, the menu will display “No Device Detected” (Figure 17)
Figure 17
Note:
If you require additional assistance, please contact TVU Networks Customer
Support at +1 650 440 4812.
Summary of Contents for MLink TE4100
Page 2: ......
