TVU MLink Set-up and Operating Guide
TVU MLink
Page 19 of 75
Figure 15
B. Check
Automatically
register with the network after BGAN terminal switches on
and then click
OK
. Then power off the BGAN device.
2.
Connect the BGAN to the TM8200 by Ethernet cable.
3.
Pointing to satellite by the Web UI of the Pack configuration from iPad or IE, for
Hughes 9201, it has signal strength indicators on the panel.
Note: You may need to manually adjust the equipment location and orientation in
order to confirm the signal strength is greater than 60%
4.
Set the link mode. “X-stream” is the default mode set up by the TVUPack
automatically.
Figure 16
Summary of Contents for MLink TE4100
Page 2: ......
