33
33
14. Speedometer
Indicates the vehicle speed in kilometer per hour
(based on factory setting).
15b. Trip meter A & B
Trip meter indicates the trip distance travelled in
kilometers. The digit after the dot mark denotes the
one tenth of a kilometer.
Provision to measure two different distance ‘TRIP A’
or ‘TRIP B’ is provided for the users to use as per
their convenience.
15c. Distance to empty (DTE)
Indicates the approximate distance that can be
covered by the vehicle with the available fuel in the
tank.
DTE value will be shown only when fuel bar is
between 1 to 8 and in LFI blink condition. In empty
and 9 bar condition ‘- -’ will be displayed. In addition to
above conditions in which DTE cannot be calculated
not limited to fuel sensor error ‘- -’ will be displayed.
If you notice an error message ‘- -’ instead of speed
indication when the vehicle is in move, Contact
nearest TVS Motor Company Authorised Main Dealer /
Authorised Dealer.
Note
15. ODO - Trip A & B - DTE indicators
The procedure for setting ‘ODO’, ‘TRIP A & B’ and
‘DTE’ modes is given in page no. 38.
15a.Odometer
Odometer registers the total distance covered by the
vehicle in kilometer. Set the meter in ‘ODO’ mode to
know the odometer reading.
Incase of single channel ABS vehicle ODO mode will be
displayed always. No need to set the ODO mode.
Note
