98
Side walls of the tubeless tyres which are in contact with
the wheel rim are only seals the air inside the wheel
assembly. Hence, care should be taken not to damage
the side walls of the tyres during removal / reassembly.
Wheel balancing to be done every 1 year or every
12000 km and also after every tyre puncture repair
or tyre replacement to have better high speed
performance.
Caution
Tyre puncture
TVS RONIN is fitted with a tubeless tyre on both front
and rear wheel. lncase of any puncture / tyre damage
it is advised to visit nearest tyre manufacturer Dealer
or the tyre repair shops who know the repairing
methods of tubeless tyre.
It is not necessary to remove the tyre from wheel rim
always to attend the puncture. Even though, if there
is a need of tyre removal, it is strongly recommended
to use a tyre removal / fitment machine.
If at all, tyre levers need to be used, the levers should
be free from sharp edges and care should be taken
not to damage the rim and tyre.
Use of a tyre other than the standard may cause
instability and improper function of ABS.
Keep the toner ring upwards whenever the wheel is
removed in order to avoid damage to the toner ring.
Damaged toner ring affects the ABS function.
Warning
