44
First time Bluetooth paring:
To pair your Android smart phone or iPhone with
your TVS RONIN motorcycle’s connected instrument
cluster, via Bluetooth, for the first time, follow the
procedure as described below:
• Press and hold the ‘Mode’ button for few seconds
till the display enters ‘CLOCK SETTING’ mode’.
• Release and press the ‘Mode’ button one time so
that the display enters ‘ ‘ mode.
• After entering the BT pairing mode, open the
mobile app and just press the ‘Connect icon’ of
the mobile app to establish the connection with
the cluster.
• On pressing this icon, the app opens a screen
where you will be asked to grant permission to
turn ‘ON’ your smart phone’s Bluetooth if it is in
‘OFF’ condition. Turn ‘ON’ the Bluetooth.
• Else, press the ‘Scan Device’ icon to initiate
the search incase the app is not searching
automatically.
• The app searches and lists the available
clusters. Just select the listed cluster. The app
communicates with the cluster and the cluster
generates a pass key.
Enter this pass key in the app screen to complete the
connection.
For the first time pairing, the connected instrument
cluster should be in ‘BLUETOOTH PAIRING MODE’.
During the course of pairing process, there is any
occurrence of error, the connected instrument cluster
should be turned ‘OFF’ and ‘ON’, and the application also
need to be restarted.
Please remember that, all the smart phones are not
compatible for pairing with the TVS RONIN motorcycle’s
connected instrument cluster.
During the search of Bluetooth devices in app, if the
vehicle connected instrument cluster’s Bluetooth device
ID is not visible, try for one or two more iterations, along
with forget device from bluetooth history as explained
earlier.
If the phone enters battery saver mode, auto-pairing
during active connected ride might not happen. It takes
maximum of five minutes for auto-pairing and it can
happen in vehicle running below 10 km/h speed or
engine at idling or engine off condition.
Note
