![TVS RONIN Owner'S Manual Download Page 41](http://html1.mh-extra.com/html/tvs/ronin/ronin_owners-manual_1183614041.webp)
38
In case any fault is detected with respect to the ride
mode change in the EMS or ABS system, then your
motorcycle will operate only in the ‘Urban’ mode after
ignition key reset.
If conditions for mode change are not successful,
- A message ‘MODE CHANGE ERROR’ will
be popped-up in the notification area of the
connected instrument cluster.
- A message ‘Ch Err’ will be displayed in the
odo meter display area of the non-connected
instrument cluster.
Note
MODE AND SET BUTTONS
The ‘Mode’ (A) and ‘Set’ (B) buttons are provided to
change between various modes and to set the some
of the digital display functions of the instrument
cluster. The sequence of modes and their selections
are explained in detail below.
Short press the Mode button to access the following
modes:
1. ODO*
2. TRIP A
3. TRIP B
4. DTE
A
B
* Applicable for Connected insturment clusture version only