TVS Apache RR 310 Owner'S Manual Download Page 65

Page: 65 / 200

a4. Track Mode

Track mode has been associated with 2 different themes for day and night modes.

All the features are similar like Urban mode with some notable changes in the UI (graphics). Refer urban mode for the

detailed explanation. Although, vehicle performance will be changed due to the change in ride mode.

In track mode top speed of the vehicle is limited to 160 kmph. There is a reduction in the number of widgets (2 Nos.) when

compared to the other ride modes.

You can access SPORT & TRACK mode only after completing the running-in period, i.e., first 1000 km. Once you cover the

running-in period, Contact TVS Motor Company Authorised Main Dealer for enable the locked modes.

Note

Day Mode

Night Mode

Summary of Contents for Apache RR 310









































































































































































































Search results

Summary of Contents for Apache RR 310

Reviews:

TVS Apache RR 310, Owner'S Manual, Page: 65 / 200

Search results

Summary of Contents for Apache RR 310

Reviews: