manualshive.com logo in svg

TVS Apache RR 310, Owner'S Manual, Page: 183 / 200

Share
Download
TVS Apache RR 310 Owner'S Manual Download Page 183

170

Service Information

There are five services planned for your  TVS Apache RR 310 during the warranty period. Of these, first three are 

free services for which labour charges are free. In addition to these three free services, we have a scheme of two 

pay services. For keeping maintenance track of your vehicle, a service record sheet is also attached. Please have the 

record sheet filled by the Dealer who is carrying out the maintenance service.
Before you avail your first free service, please enter the particulars of your vehicle on the left side of this page. This 

will be useful for any reference.
For availing any of the warranty services, please take your vehicle and your owner’s manual to any of our Authorised 

Main Dealer. After completing the warranty service, for your record, the Authorised Main Dealer will affix their stamp 

on last column of record sheet.
Periodic maintenance always helps good performance of an automobile and our services are planned to keep your 

TVS Apache RR 310 performing good.

Please note that carrying out the services for your vehicle at scheduled intervals is necessary for availing warranty.

 

And please also remember that, after the services are over, periodic servicing of your vehicle at appropriate intervals, 

depending upon its extent of use, will keep your vehicle at its best level of performance.
In case need any clarification or assistance, please feel free to write to us mentioning the frame number, engine 

number and the date of purchase of your vehicle also the name and place of the Authorised Main Dealer from whom 

you bought the vehicle and getting it serviced.

Service Department

TVS MOTOR COMPANY LIMITED

P.O.Box No. 4, Harita, Hosur - 635109,

TAMILNADU, INDIA.

Toll free no. :- 1800-258-7111

Summary of Contents for Apache RR 310









































































































































































































Reviews:

No comments