manualshive.com logo in svg

TVS Apache RR 310, Owner'S Manual, Page: 151 / 200

Share
Download
TVS Apache RR 310 Owner'S Manual Download Page 151

138

Wheel balancing to be done every 1 year or every 

10000 km. In addition, after every tyre puncture repair 

or replacement, wheel balancing to be done without fail. 

Do not remove or alter the position of wheel balancing 

weights after the completion of wheel balancing.

Note

Tyre repair

•   Do not repair the punctured tyre and it should 

be only replaced. If it is necessary to ride on a 

repaired tyre, never exceed the vehicle speed 

above 100 kmph until the tyre is replaced.

Do not repair the punctured tyre. It should not be 

replaced. If it is necessary to run the vehicle on a 

repaired tyre, never exceed 100 kmph speed until the 

tyre is replaced.

Never install a tube inside a tubeless tyre on this 

motorcycle. The tube may get burst during ride due 

to excessive heat buildup which will result in serious 

consequences.

Warning

Since the rims of this motorcycle is designed for tubeless 

tyres, use tubeless tyres only. During hard acceleration 

or braking, a tube tyre could slip on the rim and deflate 

rapidly.

Warning

Summary of Contents for Apache RR 310









































































































































































































Reviews:

No comments