manualshive.com logo in svg

TVS Apache RR 310, Owner'S Manual, Page: 61 / 200

Share
Download
TVS Apache RR 310 Owner'S Manual Download Page 61

48

•  If the side stand is ON, the text message (f8) will 

be displayed in connected TFT instrument cluster.

f9

The vehicle will start in side stand in neutral gear but not 

in other gears. The vehicle will also ‘switch off’ if the side 

stand is ON and gear is changed from neutral to gear.

Incase of any errors in side stand switch - side stand 

indication will be always ON in the instrument cluster 

immaterial of side stand status.

In the event of any unfortunate accident, if the side 

stand / side stand switch has been damaged, the signal 

can be bypassed by disconnecting the side stand switch 

coupler.

Note

e9. Gear position indicator
•  Gear position indicator (f9) indicates vehicle’s 

present gear position and neutral condition. Gear 

position indication displays “--” if there is any 

problem in the system. Take the vehicle to TVS 

Motor Company Authorised Main Dealer.

Summary of Contents for Apache RR 310









































































































































































































Reviews:

No comments