7
x
The MX-6388 has EDID support that should be suitable for most needs. Each input
has two DIP switches that are used to configure the EDID capability for the individual
input(s).
DIP Switch Position
Video
Audio
Description
Pin#1
Pin#2
OFF [
Å
]
OFF [
Å
]
Up to 1080p
Surround
Default Mode 1
ͼ
EDID up to 1080p video &
surround sound audio output up to
7.1ch (DTS-HD Master & Dolby
TrueHD)
OFF [
Å
]
ON [
Æ
]
Up to 1080p
Stereo
Default Mode 2
ͼ
EDID up to 1080p video and stereo
audio for basic compatibility
among HDTVs
ON [
Æ
]
OFF [
Å
]
Up to
720p/1080i
Stereo
Safe Mode
ͼ
EDID up to 720p/1080i video and
stereo audio for basic compatibility
among HDTVs
ON [
Æ
]
ON [
Æ
]
Bypass
Bypass
EDID Learning Mode
ͼ
for learning EDID from the display
while playing any received HDMI
audio format
Note
1
The factory default setting of [SW1]-[SW8] is pin-1 to OFF & pin-2 to OFF for
1080p video and surround sound audio.
2
If the monitor displays video but no audio, try setting the audio mode to
stereo.
3
If you encounter any unsolved audio/video output problem during system
installation, try setting the relevant [SW1]-[SW8] pin-1 switch to ON
[
ª
]
& pin-2
switch to OFF (safe mode) to select EDID up to 720p(1080i) video and stereo
audio for system check.
4
Bypass means the matrix will use the EDID learned from activating Learning
Mode. Note that this could cause compatibility issues with some displays. If
you cannot get audio and/or video output, please change the DIP switch
setting to default mode or even safe mode and verify the functionality of the
device.
