9
x
FVRͩ>^PYͪOdcc^]fWZZSaRRjRΧd]
-freeze the operation of the front panel and disable
the front panel buttons (Note that RS-232/Ethernet commands will still function
normally).
Note: Deselecting outputs when a source is going to more than one output is
accomplished by selecting the source (which will then indicate the current output
destinations), and then pressing the already active outputs you wish to de-select
S^ZZ^fRQOh_aRbbW]UcVRͩFMYRͪOdcc^]͙FVWbMPcW^]fWZZͩ\dcRͪcVRbRZRPcRQ^dc_dc͈b͉Odc
still maintain the source path to any other destinations you had previously selected. (You
can accomplish the same thing by using the mute function as described above.)
5.2
Control via the Infrared Controller
The included Infrared Remote Controller has three sections of selector buttons that can
be used to control the MX-6388.
Note: The front panel buttons will not light up when using the IR remote to control the
unit.
Normal matrix functions are performed by pressing
the numbered button of the input you wish to route
Sa^\cVRcf^a^fb^Sͩ;@BGFͪOdcc^]bS^ZZ^fRQOh
pressing the numbered button(s) of the desired
^dc_dc͈b͉Sa^\cVRcf^a^fb^SͩAGFBGFͪOdcc^]b͙
After selecting your preferred input and output(s)
h^d\dbc_aRbbcVRͩF2=6ͪOdcc^]^]cVRaR\^cRc^
make the switch take place.
BaRbbW]UM]h^ScVR]d\ORaRQͩEAGD46E6>͙ͪ
buttons will result in that input being sent to ALL
^dc_dcbMScRah^d_aRbbͩF2=6͙ͪ
;ScVRͩF2=6ͪOdcc^
n is not pressed within 5
seconds of your initial input selection then all un-
taken remote selections will be cleared.
