12
Setting
FVRͩERccW]UͪOdcc^]OaW]Ubd_cVRP^\\d]WPMcW^]P^]SWUdaMcW
on menu with the following
controls:
x
FVRͩ8RcͪOdcc^]aRMQbcVRP^]]RPcRQQReWPRͭb;5
number.
x
FVRͩERcͪOdcc^]MbbWU]bM]RfQReWPR;5]d\ORac^
the connected device.
x
FVRͩDR]M\RͪOdcc^]^_R]bd_cVREcaW]UFMOZR\R]d
which allows you to assign custom names to inputs
and outputs within the software.
x
FVRͩ6cVRa]RcͪbRPcW^]MZZ^fbcVRdbRac^aRMQM]Q
write Ethernet settings from/to the unit. Ethernet
setting changes must be made while under RS-232
P^]ca^Z͙ERZRPccVRͩIaWcRF^5ReWPRͪOdcc^]c^bc^aR
your setting changes.
x
FVRͩ4^\\d]WPMcW^]ͪbRPcW^]MZZ^fbcVRdbRac^bRZRPc
between RS-232 and Ethernet control.
Note: After making changes to the Ethernet settings the user must power cycle the unit
for the new settings to become effective. If the unit receives commands from both
Ethernet and RS-232 ports at the same time the Ethernet commands will have priority.
Scan
FVRͩEPM]ͪOdcc^]OaW]Ubd_cVRERaWMZB^acEPM]\R]d
fVWPVMZZ^fbcVRdbRac^bPM]cVRP^\_dcRaͭb4A?_^acb
for connected units.
x
FVRͩERZRPcͪbRPcW^]MZZ^fbh^dc^\M]dMZZhbRZRPc
the COM port and Device ID of the unit you wish to
control.
x
FVRͩEPM]ͪOdcc^]fWZZPMdbRcVRb^ScfMaRc^bPM]
all available COM ports and display which ports
have connected devices.
x
After you have selected the device you wish to
P^]ca^Z͜PZWPY^]ͩA=ͪc^SW]MZWjRh^dabRZRPcW^]͙
Note: Selecting Device ID 255(Super) will cause the software to send commands that will
affect units with any Device ID on the selected COM port.
