TV One C2-7100, Operation Manual

Page: 40 / 150

33
7.3 Audio outputs in different modes
The following table defines the usage of the outputs in each of the unit’s
modes:
Mode AES3-id I/O 1
(and SDI1 output) AES3-id I/O 2
(and SDI2 output)
Switcher ‘Program’ audio output –
audio follows the video during
a transition* ‘Preview’ audio output – audio
follows the Preview video
source*
Independent Audio follows the video
source for 1A*
Audio follows the video source
for 2B*
Dual PIP Audio follows the video
source for 1A* Audio follows the video source
for 1B*
*Unless audio-follow-video (AFV) is overridden in the Adjust outputs menu,
where it can be forced to being a fixed audio source.
Also note that since there are 8 stereo audio channels per video source, the
above describes what happens for all 8 audio outputs – e.g. in Switcher mode
during a Take, all 8 stereo audio outputs will fade from one source to another
simultaneously.
7.4 Options available
Since the HD44 connector where these audio inputs and outputs are present
is not very ‘user friendly’ (but had to be used for space reasons), various
optional accessories are available for situations where the de-embedding and
re-embedding of the SDI audio channels is not sufficient.
Option
product
code Details
A2-7393 Break-out of 8xIN & 8xOUT to AES3-id signals on BNC connectors via
a 1.5m lead
A2-7302
Break-out and conversion of 8xIN & 8xOUT to AES signals on XLR
connectors
A2-7312
Break-out of 8xIN & 8xOUT to AES3-id signals on BNC connectors on
rack-mountable plate, complete with 1.5m lead (as per A2-7393)
A2-7322
Break-out and conversion of 8xIN & 8xOUT to analog audio on